Category: Architecture

Traditional Breakfast, Lunch, Dinner And Architecture In Taiwan

images18

Meal cult is an important part of countrys culture. Food and drink are the main necessities for sustaining life, and Taiwan cuisine takes a special place among the great cuisines of the world. Taiwan has a broad variety of dishes because of great ethnic diversity. The diversity of cuisines contains 8 principle types: Hoklo (or Taiwanese), Hakka, vegetarian cuisine, northern style cuisine, Hunan, Jiangzhe, Hong Kong, and Sichuan. Seafood is used in all these cuisines as a culinary culture of Taiwan that is simple and light.

In Taiwan people prefer to drink tea or coffee with some sandwiches for breakfast. They like fruits and sweets which are laid in a big plate on the table. For example, when the time for lunch comes, people eat salty dishes such as steamed and chopped chicken, steamed streaky pork with dry mustard cabbage, or dried mustard greens. Besides, they like rice with boiled eggs or fried potatoes with meat or fish. In Taiwan people have hundreds of receipts of dishes with rice and fish. Traditionally, Chinese dinner is laid at the round table in the center of which there is a flat circle on a revolving stand. It is necessary to point out that meals are served on big plates and are put in required amount on small plates by a person. At first cold snack is served, then time comes for hot dishes and only after these dishes the so called principle dishes are served.

In Taiwan people like to eat dishes with rice, meat and fish. In the end of dinner a soup or a broth is served. There is no dessert fruits and sweets are on the table during all the dinner and they are very often used in the principle dish (Bates 2005). Consequently, Taiwan cuisine represents one face by which a country is famous for. Traditional breakfast, lunch, and dinner in Taiwan are similar to breakfast, lunch, and dinner in Europe; however, there are some details you should know about Taiwan cuisine.

Taiwanese architecture is composed of variety of styles. The old traditional architectural model of houses in Taiwan still exists here. However, traditional architectural features of Taiwanese style become unimportant when entertaining and commercial institutions, such as shops and theaters, are built. We should emphasize that modern Taiwanese architecture unites traditional Taiwanese and European architecture styles. There appear buildings in European style, such as buildings of foreign consulates, foreign concessions, banks, hotels and clubs in big cities.

Architectural Evangelist Advocating Innovation In Architecture

images8

Architectural Evangelist is a one of a kind architectural newsletter broadcasting the message of the cause, effect and need for innovation in the field of architecture. It is the brain child of a team of designers, architects, content developers,and technicians. We are speaking to architects, students, builders, interior designers/decorators and re-modelers. Architectural Evangelist braces the change of seasons with our centralized them of spring in the first issue. Our aim is to maintain Architectural Evangelist as a quarterly issue, with news and updates about the business of offshoring, architecture and design; How Tos; creative inputs from design experts, technical professionals and industry gurus; and articles, resources and everything in between.

Spring/Summer 08 design tips for your home
Color, breeze and sunshinethats what comes to mind when you say spring. Design tips for your home that can make any ordinary room into a fun, cozy haven This spring spruce up for a breath of fresh air to sweep through your living spaces with Architectural Evangelists design ideas and tips that spell spring like nothing else can.

Going green
Building and construction have a great effect on the environment. In the United States alone buildings alone account for 40-49% energy consumption, 25% of water consumption, 70% of total energy consumption and 38% of total carbon dioxide emissions. Green building information, tips and trends.

The new face of outsourcing
In this age of competition, companies are increasingly turning to specialization for improving cost and time feasibility and increasing efficiency. With knowledge intensive areas entering the fray, it allows organization the flexibility and provides the resources for the business growth of the organization
How to tip: Choosing the right offshore services provider
To build long term relationships with offshore service provider you need to play detective and find out all you can about the organization first. Heres what you need to know

How is 3D printing technology used in Architecture and Medicine

images7

D printing technology is used to manufacture prototypes, tools, and end-user parts directly from a CAD design. This printing technology offers unprecedented flexibility as it can create a part of any dimension out of any material. Some of the 3d printing materials used include metals, polymers, ceramics, composites, and many more. The 3D printing technology has complete control over material composition, surface texture, and micro-structure of the prototype. 3D printing technology also allows the user to construct prototypes using two different materials. >

Lets take a look at this amazing technology and how it has affected the field of architecture and medicine:

3D printing for Architecture

Architects know that there is nothing like a physical model of a building when it comes to displaying their work or design concept. Physical models also play an important role when it comes to explaining and convincing the customer while selling a project.

3D printers are affordable and high quality solutions for architects. Building a physical model requires great deal of expertise, precision, and time. 3D printing machines help designers focus on their building design, while the devices make 3D models of the project.

Many architects are not tech-savvy and are not used to operating complex devices. 3D printers do not require human intervention at any stage of the printing process. Architects just need to need to draw a CAD diagram of the project and instruct the 3D printer to build a 3D model. The 3D printer can print the model within a few hours, which can then be presented to the client.

3D printers are capable of producing of 3D models with accuracy and speed without compromising on the finer details of the architectural project. The price of desktop 3D printing machines is not that high and independent architects can also afford them.

3D printing for Medicine

The application of 3D printing technology can also be found in the production of medical devices. There are different 3D printing materials available that can be used to build real parts. For example, manufacturing hearing aids is a complex process because they are custom-fit devices and cannot be mass produced. 3D printing greatly helps in such matters where medical devices need to custom-fit a patient.

The future of the 3D printing technology is very bright. Market experts state that 3D printing technology will be affordable to the masses by the next decade. The prices of 3D printing devices are falling rapidly, and it is believed that the prices of 3D printers will drop by as much as 80% in the next 5-10 years. It will not be a surprise to see 3D printing devices in each household just like refrigerators, washing machines, and televisions.

Struggles and New Approaches to Information Architecture

images10

Information architecture is defined as the outline or blueprint that describes how data and information is systematized, ordered, and controlled. Another definition of information architecture says that it is a system of spotting, managing, and controlling patterns in data. This data-handling technology aims to be able to make complex, ambiguous, and fuzzy sets of information, data, and other resources as simple and as understandable as they can be.

According to a business-related site, it has been unfortunate in these modern times that most business companies struggle in terms of the use of the technology of information architecture. Actually, some businesses are having difficulties even with the most basic applications of information. A significant quantity of companies still experiences difficulties in getting up-to-date, comprehensive, precise, and accurate views of the results of the projects and actions they have done previously. Companies now just create proposals for new, innovative, predictive, and analytical transformation and differentiation in terms of information handling and architecture in a diminishing effort. The result of this failure of the companies to value the technology being delivered by information architecture leads to the struggles they experience that are stated in this article. e.

Companies that are struggling in executing information architecture processes need to adapt a new one that suits their needs the best. In choosing a new style of information architecture, they must bear in mind that in the world of technology, the amount of information and data inputted into the Web is growing in a much rapid way. Also, the speed at which information is received has gone significantly faster than before. Data comes in various types, so an information architecture system must be flexible to such variety of files.

Automation is in demand these days. To learn more about IC693DSM302 and IC693DSM314, check online and be informed about GE Fanuc PLC.

BIM Modeling- Adding Technical Advantages to Construction and Architecture

images1

With the extensive advancements in technology, the process of construction and architecture have become more organized and streamlined. A highly precision and technology driven process, BIM modeling consists of steps for generating as well as managing digital blueprints of a building, irrespective, of its nature whether a factory, hotel, office or any other form of physical structure. The process of digitizing important data relevant to the construction of a building, aids decision-makers to make critical judgments and evaluations about modification across its lifespan including in habitation, operation, and demolition. It is now highly appreciated by architects, civil engineers, constructors and others occupied in construction of a building and infrastructure sector across the globe.

To carry out the entire project management in an effective manner, a BIM Manager or a VDC Project Manager takes control of the entire process. In projects, they work in co-ordination with Design Construction Team on behalf of the client. However, companies are also hiring BIMs at different stages of the project delivery and handling. Thus, the intensive level of dynamism and ease of customization provided by converting these important data into a suitable digital format, construct multifunctional structure on the surface. The engineering solutions offered by expert companies are now preferred by every construction firm for their projects.

A revelation to traditional building design systems that were initially dependent on two-dimensional drawings of building sections, plans, elevation and other parts, digitization of maps offers numerous advantages. It offers updated technology which include the 3D maps and introduction of factors such as time and cost as an essential part of the project data, the other two important dimensions to modern day digitized maps of home and offices.

It not only included, geometric calculations into building maps but also comprised of other factors as mention of surface space, geographic study, building material study, ergonomics, green building, light analysis, etc. which were neglected earlier. This provides an efficient solution for building construction in the hands of architects and engineers.

Many companies specializing in Engineering Design Services ensure that they make use of this sophisticated technology to offer customized solutions as per the construction concepts, ideas, and design requirements put forth by clients. The design tool of this building solution presents the different views of a building model for construction and other usages of the building. In this model, a slight change in a one object of the model or design, automatically, changes other dependent model and an architect do not need to break model for every change.

The author is an experienced Content writer and publisher for Business Development. Visit us to know more about Engineering Design Services, BIM modeling and Digitization of maps.

Know About Iranian Architecture

images6

Iranian architecture displays a class and elegance that cannot be matched with any other style of architecture and design. It is quite distinct from that of Muslim countries. The major features of Iranian architecture are: structural ingenuity basically in vault and dome construction; a skill of decoration with freedom and intricacy incomparable to any other form of architecture.

The pre-Islamic buildings include the remarkable Elamite ziggurat at Chogha Zanbil. Baked brick was used for outer surfaces by the 12th century BC. Most of the greatest buildings were built with a religious purpose, and even in secular buildings religious influences are entirely absent. Palaces were present, and their shapes, sizes and colors varied according to the ruling dynasty.

The first great development of ancient Persian architecture took place under the Achaemenid dynasty during the Persian Empire, from about 550 to 330 BC. There are numerous remains of Achaemenian period, including two palaces, a sacred precinct, a citadel, a tower, and the tomb of Cyrus.

Royal architecture under the Achaemenid also included tombs cut in solid rock, of which the best-known examples are those at Naqshah Rostam near Persepolis. Little is known of the popular building practices of the period, but archaeologists believe that the ordinary dwelling was made of mud brick. After the conquest of Persia by Alexander the Great, Greek influence, in its late, Hellenistic phase, was predominant in the arts of Persia. Examples include fragments of bronze sculpture found at Shami, and the Parthian sculptural reliefs at Behistun.

During the Islamic period “mosques” became the major buildings in Iranian architecture. Outstanding examples of early Islamic Iranian architecture include the Mosque of Baghdad built in 764, the Great Mosque at Samarra erected in 847, and the early 10th-century mosque at Nayin.

After the 17th century, Iranian artists copied European paintings and engravings, and the native traditions declined. But Iranian architecture still managed to leave a huge impact on the world.

Flexpod Net App – Innovative and Dominant Reference Architecture

images6

The converged infrastructure market finds the flexpod net app very innovative and dominant reference architecture. This data center platform from NetApp and Cisco has found appreciation from users worldwide. Many of these users choose to standardize it for mission-critical applications. This was introduced in the year 2010 and has left many impressed owing to its excellent features. The flex pod netapp scores the brownie points in terms of performance, scalability and availability. They can be found in different packages and are easy to deploy and manage. It won’t be out of context to say, they have created a buzz in the IT world worldwide. The availability of flexpodnetapp is the result of a business collaboration entered between Cisco and NetApp. Their joint efforts have been to enhance capabilities and add broader support to important applications. This is done to ensure the FlexPod is able to meet broadest possible range of IT requirements so that most business-critical applications can be run smoothly. They have been credited for supporting various types of data operating systems and virtualization of databases. Likewise, they have made efforts to address various infrastructure needs in the small and medium-sized entities. These enhancements have given the flexpodnetapp an edge in terms of higher-levels of integration. It has facilitated data centers to interconnect by offering them suitable equipment. This has, in a way, made it easy for entities to either scale up or scale out the performance. They have made storage virtualization simple which in turn has made business data management very easy. It also minimizes total cost of ownership dramatically. The technology used helps in logical demonstration of data as per requirements of virtual storage pools. In a sense, it allows you to focus on critical business applications rather than devote time on complexity of the hardware. The storage virtualization capacities come at various levels of storage hierarchy. This can be seen on all storage platforms. The network provisions are flexible and service providers can regulate flexpodnetapp depending on their needs for a specific period of time. This has given them the edge over other available options. Their biggest contribution has been its ability to provide service to more than 1000 servers. Of course, service providers interested to avail their services need to use Flex Pod in order to optimize their functioning. Flex Pod customers are proud to own one as it enables them to enjoy cloud management solutions. Its phenomenal success has prompted Cisco and NetApp to offer multiple data centre architectural designs. This has been accomplished with help of NetApp Cisco Flex pod project.

Architecture Of Yesteryears

images

Shingle style architecture is an innovative form of Queen Anne and it was originated in America during the last two decades of 19th century.This name was given by Vincent Scully, a historian of building architecture.Among the various structures in America that are constructed in this style, The Hotel del Coronado in San Diego is considered as the biggest.The houses that are built in this style are horizontal structures built up on a stone laid foundation.The asymmetrical designs and irregular construction make the building process highly complicated and as a result the cost of construction was far beyond the affordable range for common people.Thus it was considered as a luxury homes design. The roofs are more complex in this type of architecture. Many of such houses have gabled roofs with a tower in the front. A few houses have roofs that are hipped. In the gambrel form of roofs, the third storey of the building will be hidden in the roof so that the building will appear as a two storeyed building. The roof shingles and wall shingles will be in different colors. Most of the houses have towers and if a building is without tower, a part of its wall will be bulged out.

This type of architecture has the provision for more numbers of big and small windows. The windows are mostly double-hung with a single sash below and multiple sashes above. For huge walls, the windows will be in 2, 3 or more rows and there are various designs for the windows. In the most complex designs, large windows are kept in bays with 1, 2 or 3 stories. The more stylish windows will be in square, rectangular or circular shapes.Entrance with spacious porch is characteristic of this architecture.People used to relax in the porches which are supported by balusters, columns or stone supports.

The modern houses that are built in Shingle style architecture offer a host of distinctive features including natural surroundings, energy efficiency and healthy indoor atmosphere. These houses demonstrate how wood, stone and sunlight can be utilized to provide a healthy shelter.There are many holiday homes that are built in this style of architecture. Many wealthy people have constructed this type of homes at famous resorts and also at sea-side plots. Natural colors, exterior covered by wooden shingles and an asymmetric structure are the basic features of this architectural form. The other common features are big porches, irregular roofs, towers, verandas, asymmetric floors, chimneys, huge staircases and fireplaces etc.

Are you looking for Shingle style architects and luxury vacation homes, vanbrouck is the best choice. It is highly recommended from both a design and value standpoint when we were looking to home designs and build our dream home. For more information about Shingle style architecture please visit us.

Architecture Today Getting The Feeling Of Home

images8

Being elderly and needing daily support from a long term residential care facility doesnt mean your accommodation has to be plain, unstylish, boring, or worse – institutional. With a diverse selection of affordable architectural styles today, even long term care accommodation can let go of the utilitarian architecture and begin with a fresh new start of appealing design that reflects a home-like atmosphere in a functional package.

Designing senior living with a reflection of the past, a base of the practical present and a touch of the future are sure to meet the needs of the aging population as it continues to grow. The senior consumer of the future will come with many profiles and will be looking for living arrangements that reflect a wide expanse of taste, living requirements and values, at a range of price points from affordable to extravagant.

If you had the option to design and build your own home, or a facility that would become your home, wouldnt you let your imagination run wild and creativity soar to include and consider the many possible design options that exist in the resource bank of architecture?

Architecture today is a wide-open array of taste from the old world style with the accents of stone and stucco, tile roofs and heavy beams all very suitable to homebuyers looking for a connection to the historic past. A farmhouse or a country home with simple floor plans, warm colours and cozy spaces would please many individuals looking for a connection to an era of not so long ago. Ranch style homes of the 1950s are ever popular for those looking for a one floor living plan who are not afraid to recapture a retro look, or something more open with glass such as garden doors opening onto a landscaped patio or view of a park like backyard. Designing for seniors means paying attention to details such as uncluttered hallways and wheelchair accessible traffic zones, but it doesnt preclude the designer from planning style and space that feels like home.

Working with an architect to bring together your design ideas, your creativity, an outline of what your needs may be for comfort, space, budget, maintenance and functionality, are all necessary details and requirements that go in to the design of a building that not only serves its occupants but feels inviting like home.

Architecture meets Industrial Design

images5

Title: Architecture meets Industrial Design

Text & Photography: Foster + Partners

Blurring the lines between architecture, interior design and industrial design, F+P once again prove that design is seamless and universal

Foster+Partners has proved its design prowess beyond the building industry and carries it forward to designing the interiors and furnishings for a commercial aircraft, drawing on its previous commissions for yachts and private jets.

Following the successful refurbishment of The Wing, Cathay Pacific’s flagship lounge at Hong Kong International Airport, the practice has carried the lounge’s sophisticated design into the first class cabin of the Boeing 777-300ER fleet refreshing the award-winning cabin.

The Wing, which opened earlier this year,is the second in a series of lounges by Foster + Partners for Cathay Pacific at HongKong International Airport. Every detail of the interiors,from the Champagne Bar to the bathroom fittings in the luxurious first class -cabanas’, has been custom-designed by the practice to create an exceptional experience for guests.

Besides the plush interiors, the lounges are furnished with a number of unique pieces designed by Foster + Partners, including a marble reception desk,food counter and a free-standing champagne bar with integrated trays – down to the detail of porcelain plates. Alongside the bespoke products and one-off furniture pieces, The Wing also features the Ilium cylindrical table light, developed with Nemo and the Foster 503 armchair by Walter Knoll.The highlight is the Cathay Solus Chair, the airline’s signature developed with Poltrona Frau that responds to the desire for privacy in the midst of a busy public space with its hourglass form and multi-utility constitution: the circular form incorporates a wide,comfortable seat, an integrated a power supply and a table, which can be used as an informal desk. The ribs of cushion at the back of the chair extend in places to form ridges, which can be used as armrests.

Creating a seamless experience for passengers, the cabin’s design shares the lounge’s palette of warm white leather,reflective dark grey surfaces and walnut finishes to create a calm, understated interior. Every element is considered and refined, including the stitch of the bespoke covers for Cathay Pacific’s celebrated first class seat, the handmade woollen carpet, the refurbished bathrooms and the new reading light, which has been custom-designed to cast fewer shadows when working or dining.

to view images click on globalhop.indiaartndesign.com

Page 2 of 4«1234»

Best Links

Copyright © 2017 Home Shower